Woodworking hand tools are the basic gears that a woodworker should have to complete easy and small projects. If you have just developed an interest in woodworking, then this section will provide you with the most basic hand tools that you should have before starting a project.
Identifying the things that you want to make will help you in determining the type of tools and materials that you would need to complete it. Woodworking is a very rewarding craft, but it can be very overwhelming so beginners like you, focus on small and easy projects and progress over time.
Related Reading: which miter saw to buy
You can search online for simple projects that you can start off with. In fact, there are thousands of sites that provide you simple DIY woodworking projects. But, to save you some time, here are some of the best projects that you can start with.
- Table. The ideal one to create is a side table a very basic one. You can use this as additional furniture to your porch, to your living room, or to your bedroom. You can paint it if you want to give it a more polished look.
- Bookshelf. If you do have books that are just lying around the house, you can organize them on your DIY bookshelf. Again, you can start with the most basic design. You can either have one that stands alone or you have one that you can just mount on the wall.
- Stool. If you have a side table, you can make a simple stool. If you want to amp it up a bit, you can make a bench.
- Picture Frames. Yes, you can add up some rustic look to your house, by replacing your store-bought frames with the ones you created.
- Wine Rack. If you are tired of your old wine rack, make one.
Basic Hand Tools for Beginner Woodworkers
- Jack Plane – is a general-purpose bench plane, used to typically smooth the edges of a wood. It also is used in sizing a wood. By applying adequate pressure to the tool, the blade allows you to peel off a few layers of wood.
- Panel Saw – is a machine that allows you to cut woods in the sizes you prefer.
- Chisels – are tools that have a blade at the bottom that is designed to carve a wood. They come in sizes so depending on your desired project, buy those that you would use most.
- Back Saw – most commonly known as a hand saw. This is necessary for a minor sawing process.
- Combo Square – it is a measuring tool. This tool is very helpful when you are doing some woodwork because it helps you determine angle and surfaces to ensure a good finish.
There are other materials that you might need which include, but it not limited to sanding paper, nails, glue, and hammer. However, the need of these materials may vary depending on the project that you are about to make. This article was only made possible by the contributions from Sawist.com
How do spring airsoft guns work?
To put it simply, spring powered airsoft guns use a small but powerful coil to create air pressure which in turn projects a BB forward. When the gun is cocked the coil is compressed, allowing a chamber in the gun to fill with air, while at the same time a BB slips into firing position. Once the trigger is pulled the spring is released, this compresses the chamber that was filled with air. There is nowhere for all this air to go but out the barrel, and only a BB stands in its way. The BB is projected out of the barrel at speeds of 200 FPS and up, allowing the compressed air to escape behind it.
When deciding to go with spring powered airsoft guns the most important thing to know is that this type of power is purely mechanical. Meaning that the user must cock the gun before each shot. This is the only way to compress the spring inside of the gun. Because of this some people tend to avoid spring airsoft guns; however, there are some applications where a spring powered gun is more than adequate and at times even desired.
Different types of Spring Airsoft Guns?
Spring guns are generally inexpensive and you’ll found a lot of entry level guns using spring power, making this a great choice for a first gun. However, for the more experienced user there are some great spring powered airsoft guns that powerful, versatile and work exceptionally well. Being that spring air rifles need cocking each time to fire, their use is limited but the following styles of guns make using spring power fun by adding a realistic aspect to shooting.
Many airsoft manufactures make relatively inexpensive spring powered airsoft sniper rifles. Snipers tend to be hidden and far from their targets which means that their rifles need to be powerful and have a higher FPS rate. Many real sniper rifles are bolt action this translate perfectly to a spring action airsoft rifle, allowing a realistic and functional experience for the user.
Another great use of spring power is in airsoft revolvers, where you have a very limited number of rounds and cocking the gun after each shoot is true to using a real revolver.
Airsoft shotguns also tend to be powered by spring. Again this is true to an actual shotgun, where the user must cock the gun before each shot.
Somewhat in the same category as a shotgun is the airsoft grenade launcher. Many launchers are powered by spring, with a few exceptions, depending on the way the launcher is intended to be used. Some airsoft grenade launchers are meant to attach to an assault rifle while others are intended to be used for the sole purpose of grenade mayhem.
How do I maintain my spring powered airsoft guns?
Using springs as a source of power to shot a projectile is very common technology and has been refined over decades. Springs were the initial source of power for airsoft and BB guns. This was for many reasons but mainly because it was simple, only a few solid parts were needed, the products were durable, reliable and needed minimal maintenance if any at all.
This still remains true for lower end spring powered airsoft guns; maintenance is basically zero, and the products are generally very durable. More of a preemptive type care is taken, meaning don’t get your gun wet or really dirty, wipe it down after using it outside, keep your clips clean, these types of common sense rules.
When dealing with expensive air rifles or shotguns a more hands-on approach to maintenance is required. But still nowhere near as involved as say blowback airsoft pistols or some fully automatic electronic airsoft guns. Maintenance will depend heavily on what type of gun you’re using and most guns come with a user’s manual which should be referred to when cleaning or taking apart your gun.
Additional Woodworking Reading
If you are a beginner just learning about woodworking, you probably don’t own a lot of the necessary tools you will use while pursuing your new hobby or interest. You may not even know what some of the tools are or what they do.
To improve your skills in this area and build upon what you’ve done, you need many woodworking tools. A rundown including exactly what you should have follows.
One of the most important tools you should have is a drill. The most common size is a 3/8-inch, and you should get one that also serves as a driver. This will give you the ability to drill holes, as well as put in screws.
When purchasing a drill, you will need to choose between a corded and cordless drill. Cordless drills are usually more expensive, but are often more convenient and safer as there is no cord to lug around or get in the way.
Saws are also important for individuals beginning in woodworking, and there are many different types of saws you will need. Circular saws, jigsaws, and table saws are the most common. Circular saws are handheld and are great for cutting large pieces of plywood into smaller sections.
Table saws consist of circular saws that are mounted to a table. They can quickly cut major pieces of wood and are more stable in cutting than the handheld circular saws happen to be. Jigsaws are handheld saws that allow you to cut curves and other shapes.
You’ll also need a sander or two. Sanders are important in smoothing your project out and providing the finishing touches for it. Belt sanders are used for major sanding, whereas a finishing sander is used at the end of a project as a final way to smooth out any small, rough areas.
Depending upon what type of project you are undertaking, you may also need a router, biscuit joiner, drill press, lathe or additional woodworking tools.
Before beginning your project, you should determine if any of these tools are necessary for the specific project. Most professional plans list what tools you will need to complete the project from start to finish.
Now that you know which tools are necessary, you might wonder exactly which brand you should purchase. There a number of brands available for you to choose from ranging in a variety of prices.
However, a good rule of thumb with woodworking tools is that the more expensive the tool, the better quality it is. If you are looking for quality brands, consider purchasing Jet Woodworking tools or Incra Woodworking tools.
There are many different woodworking tools available on the market today. If you are a beginner just starting a hobby in woodworking or you’ve recently developed an interest in this area, you should familiarize yourself with the basic woodworking tools before beginning a project.
By knowing the different tools and what they are used for, you will be able to choose a project and the appropriate tools for it.